A high performance cement based wall & floor adhesive. When used with Primer G, suitable for fixing large format ceramic and porcelain tiles to most wall types. Also a slow setting floor adhesive suitable for solid floor screed when used with Primer G. Not suitable for any wooden floors.
Approx. coverage of 7m2 for wall and 5m2 for floors per 20kg bag.

Price:	£21.35 per item (inc VAT)
Size:	20kg

Size (pack): 5ltr/10ltr
Coverage: 10m²/10 litres for 1mm bed thickness.

ARDEX D 20 is a ready mixed adhesive for fixing ceramic tiles to all internal walls in dry or intermittently wet locations, e.g. domestic showers, kitchens and bathrooms. No primer required, easy to apply with excellent slump resistance and offers up to 20 minutes open-time and 40 minutes tile adjustability. Tremendous adhesion strength and reliability.



ARDEX D 20 is classified as D1 T (normal dispersion adhesive with reduced slip) in accordance with BS EN 12004.

Price:	£23.29 per item (inc VAT)
Size:	10 Litres (16 Kg)

A penetrating sealer formulated to darken, enrich, and highlight unsealed natural stone

Price:	£59.42 per item (inc VAT)
Size:	946mls

Acrylic Primer for Walls & Floors
USE FOR:

preparing floor and wall backgrounds prior to fixing of ceramic/mosaic and natural stone tiles
dry/wet - interior/exterior
USE UNDILUTED ON:

plaster walls/plasterboard when using a BAL cementitious powder adhesive
tongue & groove floorboards
anhydrite screed floors
USE DILUTED 1:1 with clean water on:

dusty/porous plaster walls when using a BAL ready-mixed adhesive
cement: sand screed/concrete floors

Price:	£18.68 per item (inc VAT)
Size:	2.5 Litres

This versatile, fast-setting, cement-based adhesive is suitable for fixing both ceramic tiles, mosaic and similar wall and floor finishes in both exterior and interior situations where early use of tiling is required. It is also ideal for tiling work carried-out at lower temperatures. It provides excellent adhesion to cement/sand render and screeds, in-situ/pre-cast and aerated concrete, brickwork, interior asphalt. These cements are also suitable for use in swimming pools and other continuously-immersed situations.

Price:	£19.80 per item (inc VAT)

Admixture for Wall & Floor Adhesives
USE FOR:

improving physical properties/performance of some BAL cementitious powder adhesives including:
BAL Gold Star/BAL CTF3/BAL Wall & Floor/
BAL Rapidset/BAL Pourable Thick Bed/
BAL Supercover Rapidset
dry/wet - interior/exterior

Price:	£42.91 per item (inc VAT)

Admixture for Wall and Floor Grouts
USE FOR:

improving physical properties/performance of some
BAL cementitious powder grouts including:
BAL Grout/BAL Wide Joint Grout/
BAL Microcolour Grout/BAL Microcolour Wide Joint Grout
dry/wet - interior/exterior

Price:	£25.19 per item (inc VAT)
Size:	2.5 Litres

PCI Tilefast Non-Slip is a ready-to-use, thin-bed acrylic tile adhesive designed for applications requiring up to 3mm thickness. It offers excellent grab and thus virtually eliminates the need for battens and spacers. It is ideal for a range of general domestic wall applications such as in kitchens, bathrooms and showers and can be fixed to most interior wall surfaces.

Price:	£13.28 per item (inc VAT)
Size:	10 Litre

CG2F Rapid-setting Tile Grout for Walls*
JOINTS: 2mm to 20mm

USE FOR:

protecting against bacteria and black mould
most tile types, including porcelain
dry/wet - interior/exterior/heated floors/overlaid plywood floors (minimum 15mm)
including power showers/wet rooms (NOT swimming pools or food preparation/storage areas)
POT LIFE AT 20°C: 30 minutes

SETS IN: 2 hours

COLOUR CHOICE: 9: White, Manilla, Champagne, Gunmetal, Pebble, Ebony, Smoke, Chocolate, Cocoa

Price:	£14.21 per item (inc VAT)
Size:	5kg

This versatile, easy-to-handle, cement-based adhesive is perfect for fixing ceramic wall and floor tiles, quarry tiles and similar materials in almost any situation, both inside and out. It provides strong adhesion to cement/sand screeds, to in-situ/pre-cast and aerated concrete, brickwork, gypsum plaster, plasterboard and interior asphalt. It is suitable for use where the tiling is fully immersed in water.

Price:	£46.76 per item (inc VAT)

PCI Tilefast Super is a ready-to-use acrylic tile adhesive developed by PCI for tile-on-tile applications as well as being suitable for the majority of interior wall surfaces requiring a coverage thickness of up to 3mm. Tilefast Super is suitable for tiling to cement/sand render, gypsum plaster, plasterboard, other sheets and boards.

Price:	£15.56 per item (inc VAT)
Size:	10 Litres

Solvent gel to remove adhesives and paint.

Where to use:
- Removal of old natural and synthetic resin based adhesives and paint.
- Cleaning old adhesives from marble and ceramic flooring, levelling compounds, ceramic tiles, mosaic, gypsum, metal, fibre-cement coverings.
After treatment with Pulicol wash the surface with water and soda then rinse.

Technical data:
Consistency: gel.
Colour: transparent.
Flammability: yes.
Application temperature range: from 10°C to 35°C.
Waiting time before removal:
- adhesives in water dispersion or in solution: 5 minutes;
- reactive adhesives: 60 minutes.
Storage: 24 months.
Application: by brush.

Consumption
0.3 kg/m2.

Price:	£37.03 per item (inc VAT)

CG1 Tile Grout for Walls
JOINTS: up to 3mm

USE FOR:

ceramics/mosaics
dry/wet - interior/exterior
including swimming pools/showers (NOT power showers)
POT LIFE AT 20°C: 60 minutes

SETS IN: 24 hours

COLOURS: White (all sizes); Ivory (3.5kg/1.5kg); Grey (3.5kg only)

Price:	£15.68 per item (inc VAT)

Nanolight White can be used to fix all types of tiles. It is the ideal tile adhesive for high quality tile work requiring fine detail or for glass tiles where the adhesive may remain visible.

It is particularly useful in conjunction with glass and porcelain mosaic, glass tiles or decorative work, for instance in bathrooms, leisure facilities, swimming pools and Spas where PCI provide a complete system specification incorporating PCI's waterproofing technology.

Price:	£52.14 per item (inc VAT)

Antibacterial Tile Cleaner for Walls & Floors
USE FOR:

renewing appearance of existing grouts
dry/wet - interior/exterior

Contains Microban® antibacterial protection: for extra hygiene
Inhibits growth of bacteria and black mould

Price:	£6.88 per item (inc VAT)
Size:	750 Mls

Size (pack): 5kg (x4)/11kg
Limestone and sandstone 11kg only
Coverage: 0.25kg/m² to 2kg/m² depending on tile size and joint width - see literature.

Limestone available in 11kg only. Available in beige, limestone, sandstone, grey or white. For joint widths 2mm upwards, suitable for wall and floor tiling in internal/external locations, swimming pools, etc.

Price:	£8.78 per item (inc VAT)

Size (pack): 2kg/4kg
Coverage: 4kg per 22kg bag of ARDEX X 7/S 16
(2kg for ARDEX S 21).

Mortar admix for use with ARDEX cement-based adhesives. Gives elastic and water repellent properties plus enhanced adhesive strength if fixing to smooth or glazed surfaces.

Price:	£53.32 per item (inc VAT)

Size (pack): 11kg/22kg
Coverage: 1.4kg/m²/mm of bed thickness

Grey rapid hardening and rapid drying wall and floor tile and natural stone adhesive for internal use in dry or intermittently damp locations. Can be grouted and trafficked 2-3 hours after fixing.

ARDEX S 16 is classified as C2 FT (improved fast setting cementitious adhesive with additional characteristics and reduced slip) in accordance with BS EN 12004.

Price:	£30.73 per item (inc VAT)

Profiles for creating slip resistant and visually attractive stair nosings generally in offices and public buildings. The tread surface can be replaced in case of wear.

Price:	£54.91 per item (inc VAT)
Size:	2.5mm length wide profile

Schlüter-DITRA is a polyethylene membrane with a grid structure of square cavities, each cut back in a dovetail configuration and an anchoring fleece laminated to its underside. Designed for tile and natural stone installations, Schlüter-DITRA serves as a waterproofing membrane, a vapour pressure equalisation layer to accommodate moisture occurring at the underside of the substrate and an uncoupling layer for problematic substrates.
The substrate must be even and load bearing. To bond Schlüter-DITRA, use a bonding adhesive that is appropriate for the substrate. Apply the adhesive using a 3 x 3 mm or 4 x 4 mm notched trowel. The anchoring fleece on the underside of Schlüter-DITRA must be fully engaged in the adhesive to provide a mechanical bond to the substrate. Please observe the open time of the bonding adhesive.
Using the thin-bed method and following all applicable industry standards, set the tile or stone covering directly on the Schlüter-DITRA in such a way that the tile adhesive becomes mechanically anchored in the square, cut back cavities of the Schlüter-DITRA matting.

Price:	£15.23 per item (inc VAT)
Size:	1 metre length

A ready mixed water resistant wall tile adhesive for internal use only
- Flexible
- Water resistant
Approximate coverage 1.8 kg per square metre

Price:	£25.22 per item (inc VAT)
Size:	15 kg (10 litre)

USE FOR:-
Most types of FLOOR tiles including:

Ceramics
Porcelain and fully vitrified tiles
Mosaics
Natural Stone including marble
Slate
Most substrates including:

Asphalt (suitable grade e.g. flooring)
Concrete, cement:sand screeds and rendering
Existing vinyl tiles, unglazed ceramic tiles, quarry tiles, terrazzo and natural stone
Fibre reinforced cement boards and lightweight tile backer boards
Tongued and grooved floorboards
Underfloor heating

Price:	£67.96 per item (inc VAT)

BAL Supercover Rapid Flex is a C1FT S1 lightweight flexible fast-setting cementitious tile adhesive for walls and floors.

USE FOR:

Most tile types including porcelain
Dry/Wet - Interior/Exterior
Swimming Pools/Total immersion areas
Showers

Price:	£40.52 per item (inc VAT)

A highly flexible floor adhesive to be used in most situations on heated screeds and plywood overlaid floors, (gypsum based screeds to be primed with Primer G) To be used on its own on a minimum of 15mm Marine Ply, or mix with LatexPlus (no water) to go directly on to a rigid timber floor or chipboard.
Approx coverage 5m2 per 20kg bag.

Price:	£25.90 per item (inc VAT)
Size:	20kg

C1FT Rapid-setting Tile Adhesive for Walls & Floors
USE FOR:

most tile types, including porcelain
dry/wet - interior/exterior
including showers
Goes 60% further (vs standard adhesive coverage)
Easier application/workability
Highly water/frost-resistant
Excellent bond strength
Add BAL Admix AD1 to enable extra applications

Price:	£20.59 per item (inc VAT)
Size:	15 Kg

A Fully Water-resistant ready mixed cermaic tile adhesive, suitable for most situations excluding power-showers.
Approx coverage 5-6m2 per 15kg bucket.

Price:	£17.88 per item (inc VAT)
Size:	15kg

An Admixture to be used neat with Keraquick 20kg bag to increase flexibility to allow tiling straight onto rigid tongue and groove floorboards.

Price:	£32.16 per item (inc VAT)

D1T Tile Adhesive for Walls
USE FOR:

ceramics/mosaics/some natural stone
dry/intermittent wet - interior
domestic/commercial

Flexible
Excellent non-slip
High bond strength

Price:	£22.10 per item (inc VAT)
Size:	15 kg (10 litre)

A fast setting and drying cement based wall & floor grout, mould & water repellent, suitable for wet areas including power-showers and timber floors including underfloor heating.

Price:	£12.72 per item (inc VAT)
Size:	5 kilos

D1TE Tile Adhesive for Walls
USE FOR:

ceramics/mosaics/some natural stone
dry/intermittent wet - interior

Excellent non-slip
High bond strength
Easy to apply

Price:	£13.76 per item (inc VAT)
Size:	15 kg (10 litre)